Errors

The codes commands answer with beside their own, each set laid out once. A command's page names the sets it inherits.

Defined here

dev-tool:dev-tool

CodeMeaningRemedy
ADAPTER_CARRIES_THE_CONTRACTThe adapter being published carries its own copy of the adapter contract package, which a released tool has compiled in and which would shadow it, so it is refused rather than published.Keep the contract package out of the adapter module's root and build again.
ADAPTER_IMPORTS_BEYOND_THE_CONTRACTThe adapter being published imports a module that no tool built to the adapter contract carries, so a released tool would fail to load it.Stop importing the module the message names, or add it to the contract's importable lists first so a tool is built carrying it.
ADAPTER_CHECKOUT_MANIFEST_MISSINGThe adapter checkout the tree pins holds no manifest that loads, so what it publishes cannot be read.Run git submodule update --init --recursive in the tree's root.
ADAPTER_COMMAND_FAILEDA process the repo adapter described for this command -- the linter, the test runner, the type checker -- exited with a failure; its own output above says why.Repair what that tool's output names and run the command again.
ADAPTER_PATH_NOT_FOUNDA path given with --paths does not exist.Name a file or directory that exists in the repository.
ADAPTER_PATH_OUTSIDE_REPOSITORYA path given with --paths resolves outside the repository the command runs in.Name a path inside the repository, or run the command in the repository that holds it.
ADAPTER_REPOSITORY_DECLARES_NO_SOURCEThe repository pins other repositories and its ownRoots names no directory of its own, so a run naming no path has nothing to cover without crossing into them.Declare the repository's own directories in ownRoots in .dev-tool/config.yml, or narrow the run with --modules or --paths.
ADAPTER_SOURCE_PATH_HOLDS_A_REPOSITORYA directory ownRoots names holds a pinned repository's checkout, so a run naming no path would cross into it.Name only this repository's own directories in ownRoots; --recurse runs each pinned repository's own command in its checkout.
ADAPTER_RUNTIME_INVALIDThe repo adapter could not be asked for the command's process; the message carries its error.Vendor the adapter again with dev vendor; if it persists, report it against the adapter's release.
REPO_ADAPTER_COMMAND_NOT_IMPLEMENTEDThe repository's repo adapter has no process for this command in this language.Declare one under repoAdapterCommands in .dev-tool/config.yml, or use an adapter that implements it. Where the adapter is a configuration document, declare the verb under commands in that document, or leave the check out of the gate with gateOmissions in .dev-tool/config.yml.
REPO_ADAPTER_COMMAND_MALFORMEDThe repo adapter described a process for this command that cannot be run as written.Report it against the adapter's release, with the message.
REPO_ADAPTER_COMMAND_INVALID_PAYLOADThe repo adapter answered this command with something that is not a process to run.Report it against the adapter's release, with the message.
REPO_ADAPTER_COMMAND_OVERRIDE_INVALIDThe command declared for this verb under repoAdapterCommands in .dev-tool/config.yml cannot be rendered for this run.Correct the declaration the message names.
REPO_ADAPTER_PARAMETER_UNSUPPORTEDThe run asks the adapter to leave something out -- a tier, an isolation -- that the adapter's command for it takes no parameter for, so it would cover what it was asked to leave out.Vendor an adapter implementing the current contract with dev vendor, or run without the option.
REPO_ADAPTER_PATH_SELECTION_UNSUPPORTEDThe command declared for this verb under repoAdapterCommands does not read the run's paths, so it cannot be narrowed to the selected paths or to the repository's own roots.Run without --paths, or declare the command so that it reads the paths it is handed.
REPO_ADAPTER_CATALOG_MISSINGThe repository's repo-adapter catalog does not exist and no store it defers to is reachable, so no adapter can be resolved.Declare the adapter catalog in the manifest's catalogs with an upstream that holds the adapter, then run dev vendor.
REPO_ADAPTER_CATALOG_INVALIDThe repository's repo-adapter catalog, or the adapter coordinate the manifest names, cannot be read.Correct the catalog declaration or the repoAdapter coordinate the message names in the manifest.
REPO_ADAPTER_UNAVAILABLENo build catalog this repository reads holds a build of its repo adapter, and no store its adapter catalog defers to holds a release of it.Inside a tree run dev build --libraries-only --recurse in the tree's root; a clone standing alone sets CATALOG_ROOT to a checkout whose catalogs hold the adapter.
REPO_ADAPTER_VENDOR_FAILEDThe repo adapter was found but could not be copied into the repository's adapter catalog; the message says why.Repair what the message names and run dev vendor again.
REPO_ADAPTER_CONTRACT_UNMETThe resolved repo adapter does not implement the adapter contract this dev-tool calls, or cannot say whether it serves the repository's language version.Vendor an adapter release built for this dev-tool with dev vendor, or update dev-tool.
REPO_ADAPTER_LANGUAGE_VERSION_UNSERVEDNo release of the repo adapter is for the language version the repository states it is written for.Release the adapter for that version, or correct the version the repository states in the language's own file.
RUNTIME_COORDINATE_UNAVAILABLEA module resolved at run time names no version and the manifest states none, so there is nothing to publish it under.State a version in the manifest, or give the module's runtimeCoordinate one.
RUNTIME_ARCHIVE_FAILEDA module resolved at run time, such as a repo adapter, could not be archived for publishing; the message names the checkout and why.Repair what the message names -- most often untracked source under the module root -- and build again.
BUILD_CATALOG_COORDINATE_UNAVAILABLEThe manifest states no project or no version, so the build has no coordinate to register under.State project and version in the repository's manifest.
LIBRARY_LOOKUP_FAILEDThe build catalog lists a library but names no file for it.Publish the library again with dev build --libraries-only in the repository that holds it. A catalog you cannot rebuild from is repaired by clearing the entry with pkgmgr pkg clear --catalog-root <catalog> --label <name> --ref-type sha and registering the file again with pkgmgr pkg register.
BUILD_ARTIFACT_DID_NOT_ANSWERThe executable just built did not answer the check run on it within the time allowed, which is as broken as failing it.Pass --check-arg with something the executable can answer, or set checkArg to an empty list under the build command's argDefaults to turn the check off.
BUILD_ARTIFACT_DID_NOT_RUNThe executable just built could not be started at all.Repair what the message names, most often a missing file or permission at the artifact's path, and build again.
BUILD_ARTIFACT_DID_NOT_STARTThe executable was built but exited with a failure on the check run on it; its output is in the message.Repair what the output names -- most often a module or file the build left out of the executable -- and build again.
RECURSE_WITHOUT_VALIDATE--recurse runs the validation in every pinned repository, and this run validates nothing.Pass --validate with --recurse.
RECURSE_REPOSITORY_FAILEDThe command, run in a pinned repository's own checkout under --recurse, failed there; the message names the repository and carries its output.Run the command in that repository to see its own refusal, and repair it there.
RECURSE_REPOSITORY_NOT_VENDOREDA pinned repository declares libraries to obtain and has none vendored, so its own command cannot run in its checkout.Run dev build --libraries-only --recurse and then dev vendor --recurse in the tree's root.
AFFECTED_CHANGES_UNREADABLEgit could not be run, or failed, while reading what changed, so what the change reaches cannot be worked out.Repair what the message names -- often a --since reference git does not know -- or run with --select all.
AFFECTED_INPUT_WITHOUT_AFFECTED--changed-coordinates or --since says what changed, which only a run selecting by change reads, and this run does not select by change.Pass --select affected with them, or leave them out.
AFFECTED_SELECTION_NARROWEDThe run both says what changed (--changed-coordinates or --since) and names what to cover outright (--modules or --paths).Pass one or the other.
AFFECTED_RECURSE_MODE_FULLSelecting by change works from one repository's dependency graph, and --recurse-mode full is one run over every pinned repository, whose modules that graph does not hold.Cross with --recurse-mode isolate, or pass --select all.
TEST_NOT_IN_A_TIERTest files sit in no directory named for a tier the repository's testTiers declares, so no run would collect them as a tier.Move each test the message names into a tier's directory, or declare the tier in testTiers.
TEST_TIER_NOT_COLLECTEDWhat the run names holds tests only in tiers the run does not collect, so it would run nothing.Pass --tier naming the tier, --all-tiers, or name the test files themselves, which run whatever their tier.
TEST_TIER_SELECTION_CONFLICT--tier names tiers to collect and --all-tiers asks for every one.Pass one or the other.
TEST_FILE_PATTERNS_UNAVAILABLEWhich of the repository's files are tests cannot be asked, because the repo adapter its manifest names resolves neither through its own catalogs nor through those of a repository that pins it; a fixture cannot be told from a document it publishes.Run dev vendor in the repository the message names, so its adapter catalog holds the adapter.
TEST_TIER_UNKNOWN--tier names a tier the repository's testTiers does not declare.Name one of the tiers the message lists.
TEST_TIER_NONE_DEFAULTThe repository's testTiers marks no tier default, so a run naming none collects nothing.Name a tier with --tier, pass --all-tiers, or mark the tier a run after an edit is owed default in testTiers.
SCHEMA_REGISTRATION_STALEA schema registered in the schema store is not the document its source publishes, and every reference to it resolves to the stale copy.Run dev schema gen --force to register the current document.
SCHEMA_VENDORED_STALEA schema vendored into a repository is not the document its source publishes, and the library's models were unpacked beside the stale copy.Rebuild the package that publishes it with dev build --libraries-only and run dev vendor in the repository the message names.

dev-tool:dev.build

CodeMeaningRemedy
BUILD_REPOSITORY_MANIFEST_MISSINGA repository module the manifest declares holds no manifest at its checkout, so what it publishes cannot be read.Initialise the checkout with git submodule update --init --recursive, or correct the module's rootDir.
BUILD_REPOSITORY_FAILEDBuilding a repository module in its own checkout failed; the message carries its exit code and output.Run dev build --libraries-only in that checkout to see its own refusal, and repair it there.
BUILD_PUBLIC_ALONE--public builds an application's executable for its clients and nothing else, and was given with an option that names something else to build.Run dev build --public without the option the message names.
BUILD_PUBLIC_OF_INTERNAL--public was asked of an application declared internal, which has no client and so no public build.Declare the module's audience public in the manifest if a client is to be handed it, or build without --public.
BUILD_PUBLIC_SAME_AS_WHOLEThe application declares no internal command or registry, so its one build is what a client is handed and there is no second, public one to make.Build it without --public.
PREBUILT_EXECUTABLE_NOT_FOUNDThe prebuiltExecutables setting names a file for a module, and there is no file at that path.Correct the path in prebuiltExecutables, or put the executable there.
LIBRARY_ARCHIVE_FAILEDA library module could not be archived for publishing -- most often because its root holds source the repository does not track; the message names the files.Add each file the message names to git, or ignore it, and build again.
BUILD_ARTIFACT_NOT_FOUNDThe packager reported success for an executable, and no artifact of the expected name is where it was to be written.Read the packager's output above, repair what stopped it writing the artifact, and build again.

Referenced

The error sets its commands inherit that another unit defines.

Error setCodes
toolchain:toolchain-release17
pkgmgr:pkgmgr-store32

cli:cli

CodeMeaningRemedy
REPO_ROOT_VALIDATION_FAILEDThe repository root the run was given, by --repo-root or by the directory it was started in, is not a directory that can be acted on.Run the command from inside the repository, or pass --repo-root naming its root.
RUNTIME_CONFIG_FAILEDA runtime configuration file the run reads -- the application's cli.config.yml at one of its scopes -- does not load, or sets an argument default a scope may not set.Correct the file the message names; config init writes one that loads.
COMMAND_CONFIG_FAILEDThe configuration the command itself is declared by does not load, so the command cannot be run. This is a fault in the application as it was built, not in anything the person running it supplied.Report it against the application's release, with the message; reinstalling the release with update --force replaces a damaged copy.
MANIFEST_VALIDATION_FAILEDThe command reads the repository's manifest.yml, and none was found at the root, or the one found does not load.Run the command in a repository that has a manifest, pass --manifest naming one, or correct the manifest where the message says it does not load.
APP_CONFIG_FAILEDThe application's own configuration file in the repository does not load against the type the application declares for it.Correct the file the message names; config init writes one that loads.
INPUT_VALIDATION_FAILEDAn argument the command line gave is not one the command accepts once it is read -- the wrong type, a value outside its choices, or one a rule on the input refuses.Give the argument as the command's --help describes it.
OUTPUT_VALIDATION_FAILEDThe command answered with data that does not match the output it declares, so the answer was withheld. This is a fault in the command, not in how it was run.Report it against the application's release, with the command line that produced it.
PIPE_STDIN_NOT_PIPEDThe command was asked to take its input from stdin, by --from-stdin or by - as a document input's value, and nothing is piped to it -- stdin is a terminal, or there is none.Pipe in the output of a command run with --response-format json, or give the input another value.
SECRET_NOT_GIVENThe command takes a secret input, which is never typed on the command line, and nothing was typed at its prompt or piped to its standard input.Run the command at a terminal and type the value at the prompt, or pipe it to the command's standard input, one line for each secret it takes.
SECRET_STDIN_CLAIMEDThe command takes a secret input from standard input, and standard input already carries its piped inputs -- --from-stdin, or a document input given - -- so there is nothing to read the secret from.Run the command at a terminal to be asked for the secret, or give its other inputs on the command line.
PIPE_STDIN_CLAIMED_TWICE--from-stdin was given beside a document input given - or -:<path>, so the piped answer would be both the command's inputs and one of them.Keep one of the two forms.
PIPE_FIELD_NOT_FOUNDA document input given -:<path> names a field the piped answer does not hold -- a key no mapping on the way has, or an index past the end of a list or into something that is no list -- or the text after -: is no path.Name a field the command before the pipe answers with, as keys joined by . with [<n>] picking an item from a list, as releases[0].notes.
ENVELOPE_UNREADABLEWhat was piped to the command is not an envelope a command writes, so there is no answer in it to take as input.Run the command before the pipe with --response-format json, and pipe nothing else between the two.
PIPE_UPSTREAM_FAILEDThe command before the pipe refused, so there is no answer to take as input and this command did not run. Its own errors follow this one in the envelope.Repair what the errors after this one name, in the command before the pipe, and run the pipeline again.
PIPE_ANSWER_NOT_INPUTS--from-stdin takes the piped answer as the command's inputs by name, and the answer is no mapping, or carries a field the command declares no input for.Pipe in a command whose answer holds only this command's inputs, or give the answer to one document input with - instead.
UNHANDLED_EXCEPTIONThe command failed in a way nothing anticipated, and the message is the failure's own text.Report it against the application's release, with the command line and the message.
APPLICATION_RELEASE_NAME_UNKNOWNThe application could not tell which release it is -- the project it was released with, or which of that project's applications it is -- so it cannot look its releases up.Run the application as it was installed, from the directory toolchain install placed it in, or report it against the release.